|Custom service||Yes,we can custom logo,printing,packaging|
|Application||Home Office, Exterior and Interior Door|
|Usage||Wooden Door ,Steel Door|
|Finish||Satin Stainless Steel,Black or customized finish|
|Feature||and use the method|
Precautions for door top installation:
1. Determine whether the door stopper is installed on the wall or the floor: it depends on the actual situation.
2. Test and determine the position of the door stopper: Open the door to the maximum position, initially determine the position of the door stopper, open the door, adjust the position of the door stopper, and use the method of fine-tuning up, down, left, and right until the proper position and angle are reached. In the final test, open the door to its maximum and determine its position.
3. If it is installed on the ground, it should be limited to the fixed position of the door, and then make a final confirmation on the opposite side and make a mark. Draw a line to confirm that the door is opened to the largest position. Finally, determine the installation position of the door stopper.
4. Draw the position of the door stopper: According to the above test, it is best to locate the position of the door stopper twice, which is mainly for easy installation. Also in order to better confirm the angle of the door suction and opening.
5. Use a drill to drill the door stopper installation position: for example, drill the door stopper installation hole on the ground.